The lighter way
Sometimes, a project that requires a bit special kind of equipment may come your way. Perhaps you are on the verge of investing in a new rig but still, wait for closing that big project before investing. Maybe you would just rather not put any unnecessary pressure on your balance sheet or would like to take a little test drive on a new rig before purchasing it. Buying or renting a second-hand factory-serviced piling machine is also a great option. Rest assured, all situations are respected at Junttan.
Please contact us for further information, and check for more options, as we also have New Junttan Equipment available for Rental & Leasing.
Your local Junttan sales or
Mika Huhmo, tel +358 50 578 1040 or mika.huhmo (at) junttan.com
Junttan BV, the Netherlands
Michiel van Es, +31 6 5769 8002 or michiel.vanes (at) junttan.com
Junttan USA
Miika Eskelinen, tel. +358 50 554 0211, or miika. eskelinen (at) junttan.com
Please see below our used machines currently available
Products are categorised to X-series and Classic-series
Junttan PMx22 with SHK5/6
Used Junttan pile driving rig PMx22 with Junttan accelerated hammer SHK5/6
Well-serviced mid-sized pile driving rig with a recommended hammer size of 5-7tons. Suitable for large timber, steel and concrete piles. Self-erecting leader and easy transport mobility.
- PILE DRIVING RIG: PMx22 #1719
- Year of manufacture/Overhauled: 2016
- Working hours: n/a
- Availability: Rented
- Location: Gothenburg, Sweden
- Weight (working/transport): 69 / 51 ton (without hammer & counter weight)
- Engine type / power: Cummins QSB6,7 Tier4i ( Stage IIIB) / 179kW (240Hp)
- Leader length/Telescopic movement/Max.pile (max.hammer): 21.6/4.0/18.0m
- Leader / Pile capacity: 15.5ton / 3.5ton with 5t hammer and side auger
- Hammer winch: 11ton / D25mm steel rope
- Pile winch: 10ton / D20mm steel rope
- Horizontal boom movement: 1.5m
- Counter weight: 6.4ton
- Track shoes: 900mm
- Transport dimensions: 24.3 x 3.2 x 3.7m (hammer on the mast)
- Rig accessories: Webasto, Rear jacks, Side auger/winch 5ton in the mast
- HYDRAULIC HAMMER: SHK5/6
- Year of manufacture/Overhauled: 2016
- Working hours: n/a
- Weight total / block: 10.8ton / 6ton
- Drop height: 1.2m
- Max. Energy: 61/73 kNm
- Blow rate: 30 - 100 / min.
- Dimensions: 6.9 x 0.9 x 1.1m
- Hammer accessories: Drive cap housing D800mm
Junttan PMx22 with SHK5
Used Junttan pile driving rig PMx22 with Junttan accelerated hammer SHK5
Well serviced mid-sized pile driving rig with recommended hammer size of 4-6tons. Suitable for large timber, steel and concrete piles. Self-erecting leader and easy transport mobility.
- PILE DRIVING RIG: PMx22 #1823
- Year of manufacture/Overhauled: 2018
- Working hours: 7 000
- Availability: Rent out
- Location: Nieuwegein, Netherlands
- Weight (working/transport): 65 / 49 ton (without hammer & counter weight)
- Engine type / power: Cummins QSB6,7 Tier4F / 224kW (300Hp)
- Leader length/Telescopic movement/Max.pile (max.hammer): 18.0/4.0/15.0m
- Leader / Pile capacity: 15.5ton / 6.0ton with 5t hammer
- Hammer winch: 11ton / D25mm steel rope
- Pile winch: 10ton / D20mm steel rope
- Horizontal boom movement: 1,5m
- Counter weight: 6.4ton
- Track shoes: 900mm
- Transport dimensions: 20.3 x 3.2 x 3.8m (hammer on the mast)
- Rig accessories: Webasto, rear jacks, hammer pull-down winch 5ton in the mast
- HYDRAULIC HAMMER: SHK5
- Year of manufacture/Overhauled: 2018
- Working hours: 7 000
- Weight total / block: 9.8ton / 5ton
- Drop height: 1.2m
- Max. Energy: 61kNm
- Blow rate: 40 - 120 / min.
- Dimensions: 6.2 x 0.9 x 1.0m
- Hammer accessories: Drive cap housing D800mm
Junttan PMx22 with HHK4/5A
Used Junttan pile driving rig PMx22 with Junttan accelerated hammer HHK4/5A
Well-serviced mid-sized pile driving rig with a recommended hammer size of 4-6tons. Suitable for large timber, steel and concrete piles. Self-erecting leader and easy transport mobility.
- PILE DRIVING RIG: PMx22 #1906
- Year of manufacture/Overhauled: 2021
- Working hours: 3 000
- Availability: Available
- Location: Newark, UK
- Weight (working/transport): 64 / 49 ton (without hammer & counter weight)
- Engine type / power: Cummins QSB6,7 Stage5 / 231kW (310Hp)
- Leader length/Telescopic movement/Max.pile (max.hammer): 23.4/4.0/21.0m
- Leader / Pile capacity: 15.5ton / 7.0ton with 5t hammer
- Hammer winch: 12ton / D25mm steel rope
- Pile winch: 10ton / D20mm steel rope
- Horizontal boom movement: 1.5m
- Counter weight: 6.4ton
- Track shoes: 900mm
- Transport dimensions: 25.7 x 3.3 x 3.7m (hammer on the mast)
- Rig accessories: rear jacks
- HYDRAULIC HAMMER: HHK4/5A
- Year of manufacture/Overhauled: 2021
- Working hours: 3 000
- Weight total / block: 8.9ton / 5ton
- Drop height: 1.2m
- Max. Energy: 59kNm
- Blow rate: 40 - 100 / min.
- Dimensions: 6.2 x 0.9 x 1.2m
- Hammer accessories: Drive cap housing D800mm
Junttan PMx24 with HHK6AS
Used Junttan pile driving rig PMx24 with Junttan accelerated hammer HHK6AS
Well-serviced mid-sized pile driving rig with a recommended hammer size of 5-7tons. Suitable for steel and concrete piles. Self-erecting leader and easy transport mobility.
- PILE DRIVING RIG: PMx24 #1672
- Year of manufacture/Overhauled: 2015
- Working hours: n/a
- Availability: Available
- Location: Nieuwegein, Netherlands
- Weight (working/transport): 69 / 53 ton
- Engine type / power: Cummins QSB6,7 Tier4i (Stage IIIB) /179kW (240Hp)
- Leader length/Telescopic movement/Max.pile (max.hammer): 25,2/4,0/24m
- Leader / Pile capacity: 18ton / 8ton with 6ton hammer
- Hammer winch: 11ton / D25mm steel rope
- Pile winch: 10ton / D20mm steel rope
- Horizontal boom movement: 1.5m
- Counter weight: 6.4ton
- Track shoes: 900mm
- Transport dimensions: 15,0 x 3,2 x 3,3m (no hammer, short mast)
- Rig accessories: Rear Jacks, Extra 5ton pile winch
- HYDRAULIC HAMMER: HHK6AS
- Year of manufacture/Overhauled: 2015
- Working hours: n/a
- Weight total / block: 10ton / 6ton
- Drop height: 1.2m
- Max. Energy: 71kNm
- Blow rate: 40 - 120 / min.
- Dimensions: 6.7 x 1.0 x 1.0m
- Hammer accessories: Drive cap housing Van Hattem style
Junttan SHK4/5
Used Junttan Shark-100-4/5ton hydraulic hammer
Overhauled used hydraulic hammer suitable for steel and concrete piles with the possibility to upgrade up to 6ton
- HYDRAULIC HAMMER: SHK4/5 #21229
- Year of Manufacture / Overhaul: 2012/2021
- Working hours: N/A
- Availability: Available
- Location: Gothenburg, Sweden
- Weight (total / block): 8.1/4.0 / 9.3/5.0 ton
- Drop height: 1.2m
- Max. Energy: 49 / 61 kNm
- Blow rate: 50 - 120 / min.
- Dimensions: 5.8 / 6.2 x 0.9 x 1.0m
- Operating Pressure: 194 / 243 bar
- Oil Flow: 456 lpm
- Theoretical output: 123 kW / 154 kW
- Max pile size (round) with standard housing: D 770 mm
- Other accessories attached: Leader Guides 80/500mm
- Possible other accessories available: Control box, Energy Measuring Device, Other leader guides, Different size of pile drive caps, Hammer extensions up to 6ton, and more….
Junttan SHK5/7/9
Used Junttan SHK5/7/9ton hydraulic hammer
Overhauled hydraulic hammer suitable for steel and concrete piles, with the possibility of modifying it to 5, 7, or 9 tons.
- HYDRAULIC HAMMER: SHK5/7/9 #720001
- Year of Manufacture / Overhaul: 2025/-
- Working hours: 1 000
- Availability: Available
- Location: Kuopio, Finland
- Weight (total / block): 15.3 / 9.0ton
- Drop height: 1.2m
- Max. Energy: 119 kNm
- Blow rate: 50 - 120 / min.
- Dimensions: 10.8 x 1.0 x 1.2m
- Operating Pressure: 271 bar
- Oil Flow: 431 lpm
- Theoretical output: 125 kW / 170 hp
- Max pile size (round) with standard housing: D 850 mm
- Other accessories attached: 3 sets of slides, assembly bolts for 5 & 7 ton modes. Hammer tool kit. Flat drive cap up to D780mm steel tubes.
- Possible other accessories available: Control box, Energy Measuring Device, Other leader guides, Different size of pile drive caps, accessories for crane use (hanging) and more
Junttan SHK5/7/9
Used Junttan SHK5/7/9ton hydraulic hammer
Overhauled hydraulic hammer suitable for steel and concrete piles, with the possibility of modifying it to 5, 7, or 9 tons.
- HYDRAULIC HAMMER: SHK5/7/9 #720003
- Year of Manufacture / Overhaul: 2026/-
- Working hours: n/a
- Availability: Rented
- Location: Kuopio, Finland
- Weight (total / block): 15.3 / 9.0ton
- Drop height: 1.2m
- Max. Energy: 119 kNm
- Blow rate: 50 - 120 / min.
- Dimensions: 10.8 x 1.0 x 1.2m
- Operating Pressure: 271 bar
- Oil Flow: 431 lpm
- Theoretical output: 125 kW / 170 hp
- Max pile size (round) with standard housing: D 780 mm
- Other accessories attached: 3 sets of slides, assembly bolts for 5 & 7 ton modes. Hammer tool kit. Drive cap for 400x400 concrete piles.
- Possible other accessories available: Control box, Energy Measuring Device, Other leader guides, Different size of pile drive caps, accessories for crane use (hanging) and more
Junttan PM20LC with HHK4/5A
Used Junttan pile driving rig PM20LC with Junttan accelerated hammer HHK4/5A
Well-serviced mid-sized pile driving rig with a recommended 4-6 tons hammer size. Suitable for large timber, steel and concrete piles. Self-erecting leader and easy transport mobility.
- PILE DRIVING RIG: PM20LC #1343
- Year of manufacture: 2005
- Working hours: about 10 000
- Availability: Rented
- Location: Nieuwegein, Netherlands
- Weight (working/transport): 58 / 43 ton (without hammer & counter weight)
- Engine type / power: Cummins QSB5,9 Tier2 / 179kW (240Hp)
- Leader length/Telescopic movement/Max.pile (max.hammer): 17.0/4.0/15.0m
- Leader / Pile capacity: 15.5ton / 7.0ton with 5t hammer
- Hammer winch: 10ton / D25mm steel rope
- Pile winch: 8ton / D20mm steel rope
- Horizontal boom movement: 1.5m
- Counter weight: 6.2ton
- Track shoes: 900mm
- Transport dimensions: 17.9 x 3.4 x 3.8m (hammer on the mast)
- Rig accessories: Air compressor
- HYDRAULIC HAMMER: HHK4/5A
- Year of manufacture: 2005
- Working hours: about 10 000
- Weight total / block: 8.8 ton / 5ton
- Drop height: 1.2m
- Max. Energy: 59kNm
- Blow rate: 30 - 100 / min.
- Dimensions: 5.9 x 1.0 x 1.0m
- Hammer accessories: Drive cap housing D800mm
Junttan PM25HLC with HHK5/7AS
Used Junttan pile driving rig PM25HLC with Junttan accelerated hammer HHK5/7AS
Well-serviced large-sized pile driving rig with a recommended hammer size of 5- 7 tons. Suitable for steel and concrete piles. Self-erecting leader and easy transport mobility.
- PILE DRIVING RIG: PM25HLC #1554
- Year of manufacture: 2009
- Working hours: about 20 000
- Availability: Rented
- Location: Nieuwegein, Netherlands
- Weight (working/transport): 73 / 54 ton (without hammer & counter weight)
- Engine type / power: Cummins QSC8.3 Tier3 / 227kW (305Hp)
- Leader length/Telescopic movement/Max.pile (max.hammer): 26/4/24m
- Leader / Pile capacity: 20ton / 8ton with 7ton hammer
- Hammer winch: 15ton / D26mm steel rope
- Pile winch: 10ton / D20mm steel rope
- Horizontal boom movement: 1.5m
- Counter weight: 8ton
- Track shoes: 900mm
- Transport dimensions: 14.7 x 3.5 x 3.3m
- Rig accessories: Rear Jacks. 3rd winch 5ton. Double side cat head ( double rope for long piles )
- HYDRAULIC HAMMER: HHK5/7AS
- Year of manufacture: 2009
- Working hours: about 20 000
- Weight total / block: 11,2 / 7ton
- Drop height: 1.2m
- Max. Energy: 59 / 82 kNm
- Blow rate: 30 - 100 / min.
- Dimensions: 7.0 x 1.0 x 1.2m
- Hammer accessories: Max. D780mm pile standard, upgrades possible.
Junttan HHK5/7/9AS
Used Junttan 5/7/9ton accelerated hydraulic hammer
Overhauled used hydraulic hammer suitable for wood, steel and concrete piles with a possibility to upgrade up to 9tons.
- HYDRAULIC HAMMER: HHK5/7/9AS #21687
- Year of Manufacture / Overhaul: 2022 / -
- Working hours: about 2 000
- Availability: Available soon
- Location: Nieuwegein, Netherlands
- Weight (total / block): 13.8 / 9 ton
- Drop height: 1.2m
- Max. Energy: 105 kNm
- Blow rate: 50 - 120 / min.
- Dimensions: 7.4 x 0.9 x 1.0m
- Operating Pressure: 235 bar
- Oil Flow: 398 lpm
- Theoretical output: 155 kW
- Max pile size (round) with standard housing: D850 mm
- Other accessories attached: -
- Possible other accessories available: Sheet pile driver cap, hanging chains, large tube pile sleeve
Junttan HHK16/20S + 20CCU
Used Junttan 16/20ton accelerated hydraulic hammer and 20CCU
Overhauled hydraulic hammer suitable for steel and concrete piles, and well-serviced mid-sized hydraulic power pack to use the recommended Junttan hammer size of 10-30tons.
- HYDRAULIC HAMMER: HHK16/20S #21620
- Year of Manufacture: 2020
- Working hours: N/A
- Availability: Available soon
- Location: Nieuwegein, Netherlands
- Weight: (total/block): 40.6 / 20ton
- Drop height: 1.5m
- Max. Energy: 294 kNm
- Blow rate: 30 - 100 / min.
- Dimensions: 8.0* x 2.0 x 2.0m
- Operating Pressure (20ton mode): 301 bar
- Oil Flow: 565 lpm
- Recommended Junttan power pack: 20xCU
- Max pile size (round) with current housing: D 1700 mm
- *without accessories
- Possible other accessories available: Different sizes of pile accessories, Hanging accessories, power pack and hoses and more….
- POWER PACK: 20ccu #6351
- Year of manufacture: 2022
Junttan JD3 Side Auger Set
Used Junttan side auger set JD3 with lifting winch BB6
Well-serviced side auger set suitable for Junttan pile driving rigs bigger than PM16. Including accessories: hose hanger, hydraulic hoses, lifting winch, rope wheels, auger guide, and rails to mast.
- JUNTTAN SIDE AUGER SET: JD3 #3456
- Year of manufacture: 2006
- Working hours: N/A
- Availability: Available
- Location: Gothenburg, Sweden
- Weight (without accessories): 900kg
- Hydraulic motor/ max torque: BB7 6300ccm / 32kNm
- Max.operation pressure: 320bar
- Max rotation speed: 76 rpm
- Accessories: Hydraulic hoses with hangers, auger rails to mast, auger guide.
- JUNTTAN LEADER WINCH BB6
- Year of manufacture: 2006
- Weight: 600kg
- Hydraulic motor/ lifting force: BB6 3150ccm / 5ton
- Max.operation pressure: 320bar
- Leader winch accessories: Lifting rope, hoses, attachment bracket, rope wheels
